TPLS Interiors Ltd installs Knauf AMF ceiling tiles across London commercial fit-outs. AMF is part of the Knauf group and sits behind some of the most widely specified mineral tiles in the UK, including Thermatex and Heradesign. This page covers what the range is, how it differs from Zentia, and what to check before you order. Director-led, London-based, trading since 2006.

TL;DR

Knauf AMF is a ceiling manufacturer within the Knauf group, best known in the UK for Thermatex mineral tiles and Heradesign wood wool panels. It is a separate supplier from Zentia, which is the UK business that used to trade as Armstrong. Thermatex tiles are made by a wet-felt process from bio-soluble mineral wool, perlite, clay and starch. Pick the tile on absorption, attenuation, humidity and edge detail, then confirm the grid is compatible, because tile and grid are specified and tested together. Call 0204 572 0878.

Key Takeaways

  • Knauf AMF is part of the Knauf group and is a separate supplier from Zentia, formerly Armstrong
  • Thermatex covers the core mineral tile range, from general office tiles to high-absorption acoustic options
  • Heradesign is wood wool, a different material with a different look and a different acoustic profile
  • Choose on published absorption class, attenuation, humidity resistance and edge detail, not on the range name
  • Specify grid and tile from a compatible system, and check the datasheet rather than relying on a legacy schedule.

Knauf AMF tiles turn up on a large share of the specifications we price. They are a good range. The common problem is not the product, it is the confusion around who makes what since the Armstrong, Knauf and Zentia changes, and schedules that name a range without naming the variant.


Who Knauf AMF Are, and Who They Are Not

AMF is a ceiling manufacturer that is part of the Knauf group, and its product brands include Thermatex, Heradesign, Topiq and Ventact, alongside Donn grid.

The confusion comes from history. Knauf acquired Armstrong’s EMEA ceilings business, and the European Commission then required part of it to be carved out. That carved-out business became Zentia in 2020. So Knauf AMF and Zentia are now two separate suppliers with separate product lists, even though some specifiers still treat the names as related.

The practical point: an AMF tile and a Zentia tile are not interchangeable by default. If a schedule names one and the merchant offers the other, the performance data needs comparing line by line. We cover the Zentia side, including the old Armstrong product names, in our guide to Armstrong ceiling tiles in the UK.

Knauf AMF ceiling tile installation by TPLS Interiors Ltd in London

Mineral tile ceiling installation, London commercial fit-out

Acoustic ceiling tiles installed by TPLS Interiors Ltd

Acoustic ceiling tile installation for a commercial fit-out


The Range at a Glance

Product family Material Where we typically see it
Thermatex Mineral tile, wet-felt process Offices, education, healthcare, general commercial
Thermatex acoustic variants Mineral tile with higher absorption or attenuation Open plan, meeting rooms, cellular offices over partitions
Heradesign Wood wool Feature ceilings, sports halls, schools, exposed and robust areas
Topiq Mineral acoustic tile Where higher sound absorption is the priority
Donn Grid system Suspension for the tile range

According to Knauf, Thermatex tiles are produced using a wet-felt process from bio-soluble mineral wool, perlite, clay and starch. That composition is why they handle general commercial environments well, and also why specific humidity and hygiene ratings matter in wetter areas.

Every variant is published with its own data. That data is what should drive the choice, not the family name.


Choosing the Right Tile

Five things to read off the datasheet before a tile goes on a schedule:

Sound absorption. Published as an absorption class, A being the highest. This governs how much the ceiling takes reverberation out of the room. Open plan and meeting rooms usually want a high class.

Sound attenuation. Published as Dn,c,w in decibels. This governs how much sound passes from room to room via the ceiling void over a partition head. Cellular offices and meeting rooms usually care about this more than absorption. Absorption and attenuation pull in different directions, so a tile strong on one is often moderate on the other.

Humidity resistance. Published as a relative humidity tolerance. A tile rated for normal office conditions will sag in a space that runs damp.

Reaction to fire. Mineral tiles are typically Euroclass A1 or A2 under BS EN 13501-1. That is a property of the material. It does not make the ceiling fire resisting, which is a separate tested-assembly question covered in our guide to fire rated ceiling tiles.

Edge detail. Board, tegular or concealed edges change the look and have to match the grid. Specify the edge, not just the tile.


Installing AMF on London Fit-Outs

Most of our AMF work is either new Cat A and Cat B fit-out, or partial refurbishment where an existing ceiling needs matching in. The second one is where time goes.

On a refurbishment we lift a tile, check the back for the product identification, measure the module and edge, and confirm the grid profile. That tells us whether the current product will match the existing ceiling or whether a whole area should be replaced so the finish is consistent. It is a quick check and it saves a visible patch in the middle of a refurbished floor.

Where the brief is acoustic-led, the tile choice is only part of the answer, and partition head detail and void treatment matter as much. Our acoustic ceiling installation page covers that.

We install Knauf AMF alongside Zentia, Ecophon, Rockfon and OWA, and we are not tied to a preferred supplier list.


Got an AMF schedule to price?

Send it over and we will check the variants, the grid and the lead times before it goes out.

Call 0204 572 0878Submit Tender Documents


Working with TPLS Interiors

TPLS Interiors has been installing suspended ceilings across London since 2006. Founded by Tomasz Platek and Lukasz Swider, whose initials give the company its name, it remains director-led on every project.

We work as a subcontractor to main contractors and directly with project managers, architects and commercial occupiers, picking up a ceiling package in progress or carrying one from tender to handover.

Our material partners include Knauf, Zentia, Armstrong, Ecophon, Rockfon, OWA and British Gypsum. We specify what the job requires.


Frequently Asked Questions

Q: Who makes Knauf AMF ceiling tiles?

AMF is a ceiling manufacturer that is part of the Knauf group. Its product brands include Thermatex mineral tiles, Heradesign wood wool, Topiq and Ventact, with Donn grid.

Q: Is Knauf AMF the same as Zentia or Armstrong?

No. Knauf acquired Armstrong EMEA ceilings, and the European Commission then required part of it to be carved out, which became Zentia in 2020. Knauf AMF and Zentia are now separate suppliers with separate product lists.

Q: What is Thermatex made from?

According to Knauf, Thermatex mineral tiles are produced using a wet-felt process from bio-soluble mineral wool, perlite, clay and starch.

Q: What is the difference between Thermatex and Heradesign?

Thermatex is mineral tile, the standard choice for most commercial ceilings. Heradesign is wood wool, which has a textured, natural appearance and a robust surface, and is often used for feature ceilings, schools and sports halls.

Q: Can I swap an AMF tile for a Zentia equivalent?

Only after comparing the published data line by line: absorption class, attenuation, humidity tolerance, reaction to fire, edge detail and grid compatibility. Tiles that look similar can perform differently.

Q: Will AMF tiles fit an existing grid?

Often, if the module, grid face width and edge detail match. On refurbishments we lift a tile and confirm the existing product and grid before quoting, so you know whether it is a match-in or a replacement.


Need a ceiling package priced?

Get a quote for your London suspended ceiling project.

Get a Quote

Or call 0204 572 0878

LS

Lukasz Swider

Lukasz co-founded TPLS Interiors in 2006 alongside Tomasz Platek. He oversees every project personally and has installed suspended ceiling systems across more than 500 commercial sites in London, working with Knauf AMF, Zentia, Ecophon, Rockfon and OWA systems for main contractors, developers and corporate occupiers.

✓ Fully insured
✓ RAMS provided
✓ CSCS-qualified teams
✓ Director-led

Disclaimer: The information on this page is general guidance only. Product specifications, standards and manufacturer documentation are revised over time. Project costs, timelines and system specifications vary depending on site conditions, building regulations and scope of works. Always confirm requirements with the design team and verify product data against the manufacturer’s current documentation before specifying or ordering.